Renner Wood Coatings
Symphony Coatings supplies the full range of technically advanced Polyurethane/PU and Polyester coatings from Renner Wood Coatings – Italy’s fastest growing manufacturer of wood finishes.
Europe-wide, the wood finishing industry has come to rely on Renner’s leading edge polyurethane formulations to deliver outstanding performance, both in the finished appearance and lasting durability.
Renner has developed technically advanced polyurethane coatings in both clear and pigmented systems, offering quicker drying, higher build and more durability then has been possible. Renner’s polyester range when used in conjunction with their polyurethane products to achieve an ultra high build finish in both clear and pigmented or for a mirror-like gloss, wet look finish.
For more information and to buy Renner Wood Coatings contact your local depot or call us on 0800 840 8201.
Renner Wood Coatings
Emphasising all things surface related
When tadalafil goes through all the necessary purification stages, the manufacturer should pay special attention to quality control.
Specialist Wood Coatings
Technically Advanced Coatings
Renner has developed technically advanced polyurethane (PU) coatings in both clear and pigmented systems, offering quicker drying, higher build and more durability than previously possible. The polyester range can be used with their polyurethane coatings to achieve an ultra-high build finish in both clear and pigmented.
Internal and External Waterborne
Renner’s Internal and External waterborne range includes high performance coatings to suit any finish required. Renner also have specialist finishes for glass coatings, metallic finishes, single pack products and isolating finishes for problem surfaces.
We also supply Renner wood coatings full portfolio of internal and external waterborne and solvent products, including an impressive range of high performance external joinery coatings to suit virtually any requirement for the coating of wood. This extensive range includes many specialist finishes including glass coatings, metallic finishes, single pack products and isolating finishes for problem surfaces.
Professional Wood Coatings
Why use Polyurethane/PU Coatings?
The debate of using Acid Catalysed Curing products versus Polyurethane remains a subject of much speculation but the answer can be seen with a significant move in the UK towards polyurethane and polyester product ranges in recent years.
Typically, the two systems are as durable as each other and can look and feel similar upon final appearance but there is a big difference in the application and intended use of the substrate being sprayed.
The formaldehyde associated with Acid Cat products is still evident up to 28 days after spraying, leaving a significant health hazard until that time. Whilst polyurethane products contain isocyanates, most of these are extracted by the spray booth immediately after spraying. In parts of Europe, no furniture containing products containing formaldehyde (ie Acid Cat ) are allowed to enter a household until at least 28 days after spraying. There is no such restriction with products containing isocyanates (ie polyurethane).
Polyurethane products are also more moisture resistant and can be used on vertical surfaces in kitchens and bathrooms and other areas of humidity.
High gloss finishes are also easier to achieve with polyurethane and by using polyester primers and sealers, a mirror-like finish can easily be achieved to the envy of the Acid Cat user.
Renner Wood Coatings Range
|2 Pack PU Primers||Code||Pack Size||Sheen Levels||Reactors||Mixing
|High Build White Primer||FL-M482/C02||5,25 KG||N/A||FC-M043||2 to 1||3-4 hours||High Build White Primer for MDF, Hard & Soft Wood.
Use FC-M045 at 30% for higher build and flexibility
|High Build White Primer Filler||FL-M042/C02||5,25 KG||N/A||FC-M043||2 to 1||3-4 hours||High Filling Primer for MDF|
|Standard Build White Primer||FL-M498/C02||5,25 KG||N/A||FC-M003||2 to 1||2 hours||Budget White Primer|
|High Build Black Primer||FL-M040/C01||25 KG||N/A||FC-M043||2 to 1||3-4 hours||High Build Black Primer|
|2 Pack PU Pigmented Topcoats||Code||Pack Size||Sheen Levels||Reactors||Mixing
|Pigmented Topcoat White||FO-M060/BNC||5,25 KG||5,10,25,35,60,80||FC-M040,FC-M021,
|2 to 1||3-4 hours||High Build White Topcoat. Use FC-M040 for Non Yellow and
Scratch Resistant Properties. Thin 30-50% by volume
|Pigmented Topcoat Colour||FO-M060/Colour||5,25 KG||5,10,25,35,60,80||FC-M040,FC-M021,
|2 to 1||3-4 hours||High Build Coloured Topcoat. Use FC-M040 for Non Yellow
and Scratch Resistant Properties. Thin 30-50% by volume
|2 Pack PU Clear Sealer/Topcoats||Code||Pack Size||Sheen Levels||Reactors||Mixing
|Quick Dry Clear Sealer||FL-M003||5,25 LT||N/A||FC-M001, FC-M003||2 to 1||3-4 hours||Quick Dry Medium Build Sealer for use with FO-M200 Range|
|High Build Clear Sealer||FL-M006||5,25 LT||N/A||FC-M001||2 to 1||3-4 hours||High Build Sealer for use with FO-M200 Range.
Use with FC-M006 for higher build
|High Build Clear Topcoat||FO-M200||5,25 LT||05,10,20,30,
|2 to 1||3-4 hours||High Build Clear Topcoats. Use FC-M040 for Non Yellow and
Scratch Resistant Properties
|2 Pack PU Clear Self-Sealing Topcoats||Code||Pack Size||Sheen Levels||Reactors||Mixing
|Medium Build Self-Sealing Clear Lacquers||FL-M269||5,25 LT||15,25,45,60,80|| FC-M003, FC- M040,
|2 to 1||2-3 hours||Medium Build Clear Self-Sealing Topcoats. Use FC-M040
for Non Yellow and Scratch Resistant Properties
|2 Pack Clear Acrylic Non Yellow Sealers/Topcoats||Code||Pack Size||Sheen Levels||Reactors||Mixing
|High Build Clear Acrylic Non-Yellow Basecoat||JL-M070||5,25 LT||N/A||FC-M070||10 to 1||10 hours||High Build Acrylic Sealer|
|Medium Build Clear Acrylic Non-Yellow Basecoat||JL-M077||5,25 LT||N/A||FC-M072||5 to 1||10 hours||Medium Build Acrylic Sealer|
|Medium Build Clear Acrylic Non-Yellow Topcoat||JL-M406||5,10 LT||15,25,45,60,80||FC-M072||5 to 1||10 hours||Good All Round Multi Purpose Clear Non Yellow
Acrylic Lacquer for Light Woods
|Medium Build Clear Acrylic Non-Yellow Topcoat||JO-M070||5,25 LT||10,25,40,80||FC-M070||10 to 1||5 hours||As JL-M406 but with better Non Yellowing, Scratch Resistant
& Surface Slip Properties. Very good clarity
|High Build High Gloss Clear Topcoat||JB-M671||5 LT||Very High Gloss||FC-M640||1 to 1||2 hours||Good for over coating colours to make high gloss. Do not thin|
|2 Pack PU Wet Look Gloss Topcoats||Code||Pack Size||Sheen Levels||Reactors||Mixing
|High Build White Wet Look Gloss Topcoat||FB-M066/BNC||5 KG||Very High Gloss||FC-M648||1 to 1||4 hours||Use Wet Look Gloss PU Thinners DF-M600 Only.
Thin 30-50% by volume
|High Build Wet Look Gloss Topcoat Colours||FB-M066/Colour||5 KG||Very High Gloss||FC-M648||1 to 1||4 hours||Use Wet Look Gloss PU Thinners DF-M600 Only.
Thin 30-50% by volume
|Polyester Range||Code||Pack Size||Sheen Levels||Hardener, Cobalt,
|Barrier Coat for Oily Wood||FC-M192||5 LT||N/A||FI-M192||5 to 1||4 hours||For use on oily timbers such as Walnut to ensure adhesion
of Polyester. Thin 50-100% by volume
|Adhesion Promoter for Difficult Substrates
(melamine foils etc)
|FI-M194||5 LT||N/A||FC-M194||2 to 1||3 hours||Promotes good adhesion of PU and PE on difficult substrates
(Melamine foil etc) Thin 100% by volume
for use over stains to stop colour change
|FI-M194||5 LT||N/A||FC-M690||2 to 1||6 hours||Prevents colour change when using PE over a stain.
Thin 50-100% by volume
|White Polyester Primer||PL-M005/C02||20 LT||N/A||PC-M001, PC-M012||2%, 3%||1.5 hours||High build PE primer, ideal base for high gloss PU. Change mix
ratios if longer pot Life required, can extend to 3 hours
|Black Polyester Primer||PL-M005/C01||20 LT||N/A||PC-M001, PC-M012||2%, 3%||1.5 hours||High build PE primer, ideal base for high gloss PU. Change mix ratios if longer pot Life required, can extend to 3 hours|
|Clear Polyester Sealer – Wax Free||PL-M006||25 KG||N/A||PC-M004, PC-M012||2%, 2%||20 minutes||Cost Efficient, general purpose, easy sanding PE basecoat.
Ideal for darker timbers
|Clear Polyester Sealer ultra clear & flexible
– Wax free, Thixotropic
|PL-M210||25 KG||N/A||PC-M002, PC-M012||2%, 2%||20 minutes||Primarily a sealer but may be used ‘Coat on Coat’ and polished.
Ultra Clear & Flexible for Boats & Cars interiors
|Clear Polyester Topcoat –Wax free,
|PB-M908||25 KG||High gloss||PC-M002, PC-M012||2%, 2%||30 minutes||Ultra clear direct gloss PE topcoat. Can be polished if required|
|Clear Polyester Topcoat
(use with Paraffin Wax Liquid in Final Coat)
|PL-M260||25 KG||To be Polished||PC-M002, PC-M012||2%, 2%||20 minutes||Use AP-M046 Paraffin Wax Liquid at 2% in final coat|
|Reactors, Accelerators, Peroxides||Code||Pack Size|
|Higher Build Than FCM003||FC-M001||2.5/12.5 LT|
|Non Yellowing Reactor – Slow Drying||FC-M021||2.5/12.5 LT|
|High Build Non Yellow & Scratch Resistant||FC-M040||2.5/12.5 LT|
|Reactor for FI-M195||FC-M041||5 LT|
|High Build Reactor For Primers||FC-M043||2.5/12.5 LT|
|Slower Drying Version of FC-M043
(mix 30%) – Good Flexibility
|Non Yellow Acrylic Reactor – (mix 10 to1)||FC-M070||1/5 LT|
|Non Yellow Acrylic Reactor – (mix 5 to1)||FC-M072||1/5 LT|
|Reactor for FI-M194||FC-M194||1/5 LT|
|High Build Wet Look Gloss Reactor (mix 1 to1)||FC-M640||5/12.5 LT|
|Medium Build Wet Look Gloss Reactor (mix 1 to1)||FC-M648||5/12.5 LT|
|Reactor for FI-M194||FC-M690||1 LT|
|Reactor for FC-M192||FI-M192||1 LT|
|Cobalt Accelerator long pot life||PC-M001||1 LT|
|Cobalt Accelerator||PC-M002||1 LT|
|Non Greening Cobalt Accelerator||PC-M004||1 KG|
|Peroxide for Polyester long pot life||PC-M011||1 KG|
|Peroxide for Polyester||PC-M012||1 KG|
|Paraffin wax for polyester (add 1.5 – 2.0%)||AP-M046||0.9 KG|
|PU and Polyester thinners||Code||Pack size|
|PU thinners medium drying||DF-M002||5 LT|
|PU thinners slow drying||DF-M003||5 LT|
|PU thinners for wet look gloss||DF-M600||5 LT|
|Polyester thinners||DP-M040||25 LT|
|Reactive polyester thinners for flow||DP-M041||25 LT|
Waterbased Range for Interiors
|Water Based Pigmented System||Code||Pack Size|
|Water based Mono/Bio component white filler primer||YL—M641/–C02||5/25kg|
|Water based Mono component general-purpose white filler primer||YL—M543/–C02||25kg|
|Water based Mono component white filler primer||YL—M654/–C02||5/25kg|
|Water based Bio Component white filler barrier coat||YL—M602/–C02||5/25kg|
|Water based Mono/Bio Component white filler primer high thixo||YL—M604/–C02||25kg|
|Water based Mono/Bio Component Neutral base for dark colours||YL—M641/–NTR||25kg|
|Controlled strength white mono component topcoat(Gloss levels 5/15/30/50)||YO-**M760/–SBN||5/25kg|
|Neutral base for dark colours mono component topcoat(Gloss levels 5/15/30/50)(to be pigmented 12%)||YO**M760/–NTR||4.4/22.5kg|
|Controlled strength white bio component topcoat(Gloss levels 5/10/20/30/50)||YO-**M785/–SBN||25kg|
|Neutral base for dark colours bio component topcoat(Gloss levels 5/10/20/30/50)(to be pigmented 10%)||YO-**M785/–NTR||23kg|
|Water Based Clear System||Code||Pack Size|
|Water based clear mono component clear basecoat||YL—M663||5/25kg|
|Water based clear mono/bio component clear base coat||YL—M641||5/25kg|
|Water based clear mono/bio component clear base coat semi thixo||YL—M683||5/25kg|
|Water based clear bio component clear barrier coat||YL—M602||5/25kg|
|Water based clear mono/bio component base coat for flooring||YL—M574||5/25kg|
|Water based mono component topcoat/self sealer clear (Gloss levels 5/10/20/30/40/60)||YO-**M863||5/25kg
(60M863 in 25kg)
|Water based mono component topcoat/self sealer clear (Gloss levels 20/40)||YO-**M828||25kg|
|Water based mono component topcoat/self sealer clear semi thixo (Gloss levels 5/10/20/30/40/60)||YO**M829||25kg|
|Water based bio component topcoat clear (Gloss levels 5/10/20/30/40/60)||YO-**M785||25kg|
|Water based topcoat for flooring mono/bio component (Gloss levels 5/10/20/40/60)||YO-**M838||5/25kg|
|Water based mono/bio component self sealer natural look (Gloss levels 20/50/80)||YL—V678||25kg|
|Water based bio component topcoat natural look||YO-05M755||5/25kg|
|Water based bio component wet look gloss white||YO-90M790/–C02||5/25kg|
|Water based bio component wet look gloss clear||YO-90M790||5/25kg|
|Cross linker for glass can be added to mono and bio component products to be added 2-4%||YC—M419||0.5kg|
|Cross linker to improve chemical resistance for mono component products to be added 0.5-1%||YC—M407||0.5kg|
|Hardener for bio component products||YC—M402||1/2.5kg|
|Hardener for bio component products||YC—M403||1/2.5kg|
|Hardener for bio components gloss products||YC—M404||1/2.5kg|
|Other products||Code||Pack Size|
|Retarder for water based products||AY—M444||5lt|
|Water based detergent||AY—M460||25lt|
|Water based Anti bacterial additive||AY—M433||1lt|